Make: Getting Started with Drones by Terry Kilby & Belinda Kilby

Author:Terry Kilby & Belinda Kilby
Language: eng
Format: epub
Publisher: O'Reilly Media, Inc.
Published: 2015-10-14T16:00:00+00:00

Next, we need to mount our battery monitor on the back portion of our frame (see Figure 5-10). Start by pushing the original battery lead plug into the space between the clean and dirty frames all the way in the back of the frame. It should fit in there nice and snug with the monitor lying across the bottom of the clean frame. Be sure to route the 6-position cable across the bottom of the frame in through the same holes that you routed the ESC plugs earlier in the book. This cable will be long enough to reach the PM port on the APM, its final destination.

Because the leads on our battery monitor are so short, we can attach the monitor itself to the back end of the frame with a zip tie or two leaving the new battery lead exposed and easily accessible to our flight battery (see Figure 5-11).

Download

Copyright Disclaimer:
This site does not store any files on its server. We only index and link to content provided by other sites. Please contact the content providers to delete copyright contents if any and email us, we'll remove relevant links or contents immediately.